Calidrawer JALOPY 710 New Alu

Extendable loading floor for all California variants with a factory-fitted cabinet by Volkswagen.

New with edge over the rail, robust aluminum container without coating in natural aluminum.

The cockpit has recesses at the front and rear so that the load can be secured with tension straps or rubber bands if necessary.

Lashing straps and rubber tensioners are not included in the scope of delivery.

T5.1 Comfortline and Trendline - T5.2 California Comfortline, T6 California Ocean and Coast, T6.1 * California Ocean and Coast
Also for T6.1 Beach with 2-seater sofa bed and side storage box.

• T5 California Trendline 2004-2008
• T5 California Comfortline 2004-2010
• T5.2 California Comfortline 2010-2015
• T6 California Coast 2016-2019
• T6 California Ocean 2016-2019
• T6.1 California Ocean >2019
• T6.1 California Coast >2019
• T6.1 California Beach Tour / Camper with 2-seater sofa >2019

The number of floor rails is not relevant.
Only the two outer rails are needed.
 
Please note for the T6.1 California Ocean and Coast:

The sofa in the T6.1 is positioned differently due to the lounge function!
The sofa is now 5 cm further towards the tailgate. This way you have more space at the front if you want it.
Of course, anyone is free to restore the bank as it was in T5 and T6. Then the 760 fits again. And the 820 also goes a step further.

But anyone who wants to benefit from the space gained in the passenger compartment will also find what they are looking for with us in the future.
For the T6.1 we are currently developing a shorter version in size 710 for the new standard position in the T6.1

However, if you also want to concentrate on the storage space in the back, you can still use size 820 if you slide the bench a hand's width further forward.

Substructure made of CNC lasered aluminum corners, ground flat (delivered with protective film)

The aluminum container is made of 3 mm thick material - surface is natural silver aluminum - the corners are neatly ground.

Simple, lightweight and screwless attachment to the T5/T6 rail system. The attachment is done using spring-loaded locks.

It does not matter whether two or three floor rails are installed. The third (middle rail) is not relevant for mounting. As with the bench, only the two outer rails are used.

Very robust heavy-duty rails that lock automatically during closing and installation.

Aluminum container 80 mm high on three sides and 40 mm high at the operating edge.

The 760mm version fits the vehicle with the standard rear seat position. When selecting the 820 version, the rear seat must be moved 2-3 cm further into the passenger compartment. In the 820 version, two Euroboxes with a depth of 400 mm can be placed behind each other.

A black fleece mat is placed in the cockpit. It has a pleasantly soft surface that is easy to vacuum.

The back is covered with rubber granules and is therefore non-slip.

Dimensions of the entire extension are approximately 1000x825mm for the 760mm deep version and 1000x865mm for the 820mm version.

Any carpets attached to the side of the cupboard do not disturb.

Weight: 18.5 kg

There is a 6 mm plate above the rail. This is followed by 10mm of clearance for the drawer and the drawer itself with 3mm. This means that no more than 19 mm of space is lost. Not like the bottom of a normal box anymore.

The rear extension is available in three sizes. The difference is only a few centimeters.

The 820 version offers space for 2 Euro boxes in a row.

A dimensional explanation of the dimensions of the rear extension in the table below: The table is independent of the color version (i.e. raw aluminum or powder-coated)

We are often asked how much space is left under the Multiflexboard.

The question about the usable height is difficult to answer, because it usually concerns millimeters.

There are also Comfortline, Coast, Ocean and Beach in different multiflex boards.
The Multiflex planks and bed planks have also changed occasionally over the years.

Starting from the bottom edge of the bed plate/bed rail or the crossbeam on the beach is often an error of judgment because locks protrude further downwards.
On some vehicles the grille can then be installed at two heights.

That is why we always provide the measure of what you lose.
The rails already protrude 6 mm from the ground.

Only 18mm of the top edge of the floor is lost.
So only 12 mm from the top edge of the rail.

The rear drawer is very stable and can support up to 100 kg, evenly distributed in the aluminum tray. The heavy-duty rails are even designed to support a maximum of 250 kg.

With additional mounting (slid under the cabinet), the pull-out element can also carry up to 150 kg.