Extendable loading floor 820mm Calidrawer - BEACH WIDE

Extendable loading floor for the T5 / T6 / T6.1 California without side cabinet
T5.1 Multivan, Multivan Beach, California Beach - T5.2 California Beach, T6 California Beach, T6.1 California Beach with 3 seater sofa -
Warning. NOT for T6.1 Beach with 2 seater sofa bed and side storage. Calidrawer Jalopy fits there.

Available versions : 640mm, 740mm, 810mm and 1000mm
For all California variants without a Volkswagen factory installed box.

Substructure made of CNC-welded aluminum corners, surface ground (supplied with protective film)

The aluminum tub made of 3 mm thick material - surface aluminum silver natural - with protective film on both sides. The corners have been sanded clean.

Simple, light and screwless attachment to the rail system of the T5 / T6 / T6.1. It is fixed with original Volkswagen locks in all 4 rails.

The multiflex board remains free and movable.

Heavy duty rails 250 kg load capacity 80 mm high lockable next to installation.

Three-way folded shell 80 mm high (matching the rails) - folded 40 mm towards the tailgate.

A black fleece mat is placed in the bath. It has a pleasant, soft surface that is easy to vacuum. The back is covered with rubber granulate and thus serves for slip resistance.

The pull-out back is available in different sizes. For the Calidrawer Wide 1000 please note an additional processing time for the packaging of approx. 2-3 working days. An explanation of the dimensions of the pull-out rear wall in the table below:

Type

California Beach or Multivan with 3 seater sofa
California Beach
with 2-seater sofa

Internal dimensions

Calidrawer Beach 640

YES, also when MFB is folded down NO
645 x 1037mm

Calidrawer Beach 740

YES, when MFB is unfolded (rear seat 1-2 cm forward) YES
745 x 1037mm

Calidrawer Beach 820

YES, when MFB is unfolded (rear seat
7 cm forward)

YES, rear seat 7 cm
forward
807 x 1037mm

Calidrawer Beach 1000

YES, when MFB is unfolded (rear seat
34 cm forward) NO
1046x1037mm

* MFB = multiflex board (bed extension)

The pull-out rear wall is very stable and can be loaded into the aluminum box with an even distribution of 150 kg. The heavy-duty rails are designed up to 250 kg.

The photos above show a Calidrawer Wide 740 in a California Beach with rear seat pockets.

We have shown the resulting seating position in combination with an additional single seat for better orientation.

* MFB = multiflex board
** with multiflex board (due to the lack of seat pockets, there is approx. 8 cm more space here than in California Beach) - please note that the side sections of the Multivan with carpet tip over and must be lifted again.

The best-selling fragment is the Calidrawer Wide 740. It fits perfectly into the California Beach with a three- and two-seater sofa. With the 3-seater sofa, however, we assume that the rear surface (3) of the multiflex board is also unfolded (lying surface)

If you have the back surface of the multiflex board folded down as standard (as shown in the image below), you will need the extendable 600 Calidrawer.

With the back surface (2) folded up, a Calidrawer Wide 740 will also fit in the California Beach with three benches.

The 2-seater California Beach always fits in the Calidrawer Wide 740, as the multiflex board cannot be folded down there.

CALIDRAWER WIDE 640 (formerly Calidrawer Beach 600)
Tray size 1035 mm x 645 mm (width x depth)

Total depth with locking approx. 685 mm

Total width 1085 mm

CALIDRAWER WIDE 740 (formerly Calidrawer Beach 700)
Tray size 1035 mm x 745 mm (width x depth)

Total depth with locking approx. 785 mm

Total width 1085 mm

CALIDRAWER WIDE 820 (formerly Calidrawer Beach 800)
Tray size 1035 mm x 808 mm (width x depth)

Total depth with locking approx. 845 mm

Total width 1085 mm

CALIDRAWER WIDE 1000 (formerly Calidrawer Beach 1000)
Tray dimensions 1035 mm x 1045 mm (width x depth)

Total depth with locking approx. 1090 mm

Total width 1085 mm